Base Office: Austin, TX
Email: pchartouni@hallam-ics.com
In 2018 I obtained my BS in mechanical engineering at Texas State University. Immediately after graduation I accepted a position as a mechanical and plumbing designer. I spent three years of my career designing MEP systems for the Austin area.
After some time as a designer, I took on a new opportunity as a facility engineer at an aerospace defense company named BAE systems. One year later of working diligently at BAE I was promoted to lead Facility engineer/manager. Facility engineering is great field, but I desired a better work life balance. I missed the balance of a designer. The mix of working from home on AutoCAD then getting out and visiting sites suits me well.
I received a call from CEO Keith Flaherty about a great opportunity at Hallam. The CEO interviewing every employee before hiring is a sure sign of a proactive company. My suspicions were correct. Hallam has great teamwork culture, excellent employees, great management that is willing to train, and work life balance. All these aspects are important to me while selecting a career.
I am now working as a TGMS design engineer for a new semiconductor fab being constructed in Taylor. I am one of the first employees at the Austin Texas site. I am excited to do an outstanding job on this new facility and grow the site in my hometown.
| 363 Main Street, Suite 303, Middletown, CT 06457 |
Tel: 860-788-6815 | Fax: 802-658-1457| 575 West St., Suite 220, Mansfield, MA 02048 |
Tel: 508-821-9759 | Fax: 508-821-9739| 107 Hermes Rd., Suite 210, Malta, NY 12020 |
Tel: 518-289-5582 | Fax: 802-658-1457| 56 Hunter Street, Suite 330, Apex, NC 27502 |
Tel: 919-821-4145 | Fax: 919-821-4147| P. O. Box 350236, Palm Coast, FL 32135 |
Tel: 386-263-8331 | Fax: 919-821-4147| P. O. Box 181686, Dallas, TX 75218 |
Tel: 469-507-9194 | Fax: 919-821-4147| 817 Tradesmens Park Loop, Hutto, TX 78634 |
Tel: 512-759-8009| 38 Eastwood Drive, Suite 200, So. Burlington, VT 05403 |
Tel: 802-658-4891 | Fax: 802-658-1457* In Massachusetts, Michigan, New York & North Carolina, engineering is performed by Hallam Engineering, LLP.
Hallam-ICS Quality Management System complies with the requirements of ISO 9001:2015 for the following scope of certification:
Systems Engineering, Design and Commissioning
Arc Flash Assessments and Electrical Safety Training
Design, Development, and Assembly of Process Controls and Plant Automation Systems
Copyright © 2022 Hallam-ICS All Rights Reserved
The copyright in this website and the material on this website (including without limitation the text, images, and audio-visual material) is owned by Hallam-ICS. No use of any material covered by this copyright may be used in whole or in part without the express written consent of Hallam-ICS.