Base Office: Malta, NY
I grew up in a suburb of Fairfield County, VT as a child, and from a young age I showed interest in math, science, and engineering. It was to no surprise to my family that I was accepted to Rensselaer Polytechnic Institute when I applied to the school in my senior year of high school. While at Rensselaer Polytechnic Institute I engrossed myself deeply into my studies and even switched my major from mechanical engineering to a dual degree in mechanical and electrical engineering when my interests in other subjects grew. I graduated from Rensselaer Polytechnic Institute in 2017 after finishing my 5-year dual degree program, earning my Bachelor of Science degree in Mechanical and Electrical engineer. Not long after college, I started work at a firm that I had interned with as a mechanical engineer. It was there I learned more about HVAC field of engineering, honing my skills in drafting and design as a junior engineer. At this firm I not only learned to design and draft mechanical systems, but also electrical and control systems.
After 5 years with my previous employer, I decided it was time to move to a new firm to expand my experiences and technical expertise. It was at this time that I was hired by Hallam-ICS and have since worked on projects ranging from semiconductor fabs to wastewater treatment facilities.
| 363 Main Street, Suite 303, Middletown, CT 06457 |
Tel: 860-788-6815 | Fax: 802-658-1457| 575 West St., Suite 220, Mansfield, MA 02048 |
Tel: 508-821-9759 | Fax: 802-658-1457| 107 Hermes Rd., Suite 210, Malta, NY 12020 |
Tel: 518-289-5582 | Fax: 802-658-1457| 56 Hunter Street, Suite 330, Apex, NC 27502 |
Tel: 919-821-4145 | Fax: 919-821-4147| P. O. Box 350236, Palm Coast, FL 32135 |
Tel: 386-263-8331 | Fax: 919-821-4147| P. O. Box 181686, Dallas, TX 75218 |
Tel: 469-507-9194 | Fax: 919-821-4147| 817 Tradesmens Park Loop, Hutto, TX 78634 |
Tel: 512-759-8009| 38 Eastwood Drive, Suite 200, So. Burlington, VT 05403 |
Tel: 802-658-4891 | Fax: 802-658-1457* In MA, MI, NC, NY, and OH engineering is performed by Hallam Engineering, LLP.
Hallam-ICS Quality Management System complies with the requirements of ISO 9001:2015 for the following scope of certification:
Systems Engineering, Design and Commissioning
Arc Flash Assessments and Electrical Safety Training
Design, Development, and Assembly of Process Controls and Plant Automation Systems
Copyright © 2023 Hallam-ICS All Rights Reserved
The copyright in this website and the material on this website (including without limitation the text, images, and audio-visual material) is owned by Hallam-ICS. No use of any material covered by this copyright may be used in whole or in part without the express written consent of Hallam-ICS.